Wall Industries, Inc. broadens its product offering with the “HP” 600-watt series of through hole DC/DC converters. The HP series is designed to compliment our LV and FA product lines. It is being introduced to answer the needs of higher power systems requiring low input voltages (10vdc to 36vdc) at higher power levels up to 600 watts. It retains the standard full brick pin-out of our FA product line within the increased footprint of the converter. All models are suited for telecommunications, industrial, network, and test equipment applications.
Company Contact
Russ Berube
Marketing & Distribution Manager
603-686-5212
rberube@wallindustries.com
Wall’s “HP” 600 Watt Series
Single Outputs
Exeter, NH, May 15, 2009 – Wall Industries, Inc. broadens its product offering with the “HP” 600-watt series of through hole DC/DC converters. The HP series is designed to compliment our LV and FA product lines. It is being introduced to answer the needs of higher power systems requiring low input voltages (10vdc to 36vdc) at higher power levels up to 600 watts. It retains the standard full brick pin-out of our FA product line within the increased footprint of the converter. All models are suited for telecommunications, industrial, network, and test equipment applications. This series has single outputs of 5, 12, 15, 20, 24, 26, 28, and 48VDC.
This supply is housed in a 6 x 3 x 0.69 inch package. Additional features include high efficiencies to 92%, ultra tight line/load regulation, -40°C to +100°C operating temperature, 1500VDC I/O isolation, and active current sharing option. The standard pin-out also includes remote sense, output trim ±10%, remote on/off (active high or active low), and is synchronizable. It also has standard safety features of short circuit protection, over temperature protection, output over current fold back and has a MTBF rating of 1,293,794 hours using Bellcore TR-332.
