LV200

The LV200 is a high density, low input voltage, isolated converter with a 4:1 ultra wide input voltage range. Low input voltage converters are uncommon in the industry and the LV200 series offers the flexibility of operation with both 12V and 24V busses. This state-of-the-art converter’s features include fast transient response, short circuit protection, over current protection, soft start, and many other features that are required for today’s demanding applications.

• Soft-Start • 200 Watts Output Power • Under Voltage Lockout • No Minimum Load Requirements • Remote ON/OFF Control • High Efficiency • Fixed Switching Frequency • Cost Efficient Solution • Fast Transient Response • Made in the USA • 100% Burn-in • 4:1 Ultra Wide Input Voltage Range: 9~36VDC • Industry Standard Half-Brick Footprint • Remote Sense Compensation to 10% Vout • Single Outputs Ranging from 3.3VDC to 48VDC • 1500VDC I/O Isolation • Threaded Inserts & Thru-Hole Inserts Available • Short Circuit, Over Voltage, Over Current, and Over Temperature Protection • UL60950-1, EN60950-1, IEC60950-1, & EN50155 Safety Approvals • Heat Sink and Chassis Mount Options Available
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Output
Power (W)
No.
Outputs
Case  
LV12S3.3-200TH Input Voltage: 12/24 Output Voltage: 3.3 Output Current: 60.6A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
CMLV12S3.3-200 Input Voltage: 12/24 Output Voltage: 3.3 Output Current: 60.6A Output Power (W): 200 No. Outputs: S Case: Chassis Mount Get a Quote
LV12S3.3-200 Input Voltage: 12/24 Output Voltage: 3.3 Output Current: 60.6A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
CMLV12S05-200 Input Voltage: 12/24 Output Voltage: 5 Output Current: 40A Output Power (W): 200 No. Outputs: S Case: Chassis Mount Get a Quote
LV12S05-200 Input Voltage: 12/24 Output Voltage: 5 Output Current: 40A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
LV12S05-200TH Input Voltage: 12/24 Output Voltage: 5 Output Current: 40A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
LV12S12-200 Input Voltage: 12/24 Output Voltage: 12 Output Current: 16.67A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
CMLV12S12-200 Input Voltage: 12/24 Output Voltage: 12 Output Current: 16.67A Output Power (W): 200 No. Outputs: S Case: Chassis Mount Get a Quote
LV12S12-200TH Input Voltage: 12/24 Output Voltage: 12 Output Current: 16.67A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
CMLV12S15-200 Input Voltage: 12/24 Output Voltage: 15 Output Current: 13.33A Output Power (W): 200 No. Outputs: S Case: Chassis Mount Get a Quote
LV12S15-200 Input Voltage: 12/24 Output Voltage: 15 Output Current: 13.33A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
LV12S15-200TH Input Voltage: 12/24 Output Voltage: 15 Output Current: 13.33A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
LV12S24-200 Input Voltage: 12/24 Output Voltage: 24 Output Current: 8.33A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
LV12S24-200TH Input Voltage: 12/24 Output Voltage: 24 Output Current: 8.33A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
CMLV12S24-200 Input Voltage: 12/24 Output Voltage: 24 Output Current: 8.33A Output Power (W): 200 No. Outputs: S Case: Chassis Mount Get a Quote
LV12S28-200 Input Voltage: 12/24 Output Voltage: 28 Output Current: 7.14A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
CMLV12S28-200 Input Voltage: 12/24 Output Voltage: 28 Output Current: 7.14A Output Power (W): 200 No. Outputs: S Case: Chassis Mount Get a Quote
LV12S28-200TH Input Voltage: 12/24 Output Voltage: 28 Output Current: 7.14A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
LV12S48-200TH Input Voltage: 12/24 Output Voltage: 48 Output Current: 4.17A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
LV12S48-200 Input Voltage: 12/24 Output Voltage: 48 Output Current: 4.17A Output Power (W): 200 No. Outputs: S Case: Through Hole Get a Quote
CMLV12S48-200 Input Voltage: 12/24 Output Voltage: 48 Output Current: 4.17A Output Power (W): 200 No. Outputs: S Case: Chassis Mount Get a Quote
Specification Value
Input
Input Voltage (Nominal): 12/24
Input Voltage Range: 9~36
Input Filter: Pi Type
Remote ON/OFF: Active High or Active Low Enable
UVLO: Yes
Input Frequency: 0 Hz
Output
Output Voltage: 3.3, 5, 12, 15, 24, 28, 48
Voltage Accuracy: ±1%
Output Current: 60.6A, 40A, 16.67A, 13.33A, 8.33A, 7.14A, 4.17A
Output Power (Watts): 200
Output Trim/Adjustability: ±10%
Short Circuit Protection: hiccup, automatic recovery
Over Voltage Protection: 115-130%
Thermal Protection: Yes
General
Isolation: 1500VDC
Environmental
Operating Temperature: -40 to 100°C
Storage Temperature: -50 to 125°C
Physical
Weight: Standard Models: 4.0oz (113g)
Chassis Mount: 7.52oz (213g)
Dimensions: Standard Models: 2.40" x 2.28" x 0.50" (61.0 x 57.9 x 12.7 mm)
Chassis Mount Models: 5.70" x 3.40" x 1.10" (144.8 x 86.4 x 28.0 mm)
Case Material: Thick, Aluminum Alloy
Shielding: Six-Sided
Notes & safety
Notes: 1. The LV200 series converters may be paralleled both for redundancy and for higher output current. See page 11 for more details.
2. Maximum output deviation is +10% inclusive of remote sense and trim. If remote sense is not being used the +SENSE should be connected to its corresponding +OUTPUT and likewise the -SENSE should be connected to its corresponding –OUTPUT.
3. Output voltage is adjustable for 10% trim up or -10% trim down of nominal output voltage by connecting a single resistor between Trim and +Rs pins for trim up or between Trim and -Rs pins for trim down. To calculate the value of the resistor RU and RD for a particular output voltage see page 9.
4. This series comes with several different options: active low remote on/off control, heatsinks, chassis mount, and thru-hole inserts. See the “Model Number Setup” table on page 12 for more ordering information.
Safety Approvals: UL60950-1, EN60950-1, IEC60950-1, EN50155

Get a Quote

Request information for from Wall Industries.

Fields marked with an * are required
Medical Military Railway Lighting Industrial Level VI

Custom Solutions

Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.

Learn More