LANE-6KV

The LANE-6KV series of 1 watt DC/DC power converters are specially designed to provide ultra-high levels of isolation in a miniature SIP package. This series consists of 12 models with nominal input voltages of 5V and 12V and standard output voltages of 5V, 12V, and 15V in both single and dual output configurations. The LANE-6KV has both industrial and medical (3rd edition) approvals and offers an economical solution for many applications in industrial controls and instrumentation, consumer electronics, and wherever a certified supplementary or reinforced insulation system is required to comply with relative safety standards.

• 1 Watt Output Power • Small SIP Package • Single & Dual Outputs • Low Coupling Capacity • Short Circuit Protection • -25°C to +85°C Operating Temperature • MTBF > 2,000,000 Hours • 3000VACrms (6000VDC) I/O Isolation • Reinforced Insulation Rated for 300VAC Working Voltage • cUL/UL60950-1, CSA C22.2 No. 60950-1-03, IEC/EN 60950-1 Industrial Safety Approvals • UL60601-1, CSA C22.2 No. 601-1, IEC/EN 60601-1 (3rd Edition) Medical Safety Approvals
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Output
Power (W)
No.
Outputs
Case  
LANE1205N6KV Input Voltage: 12 Output Voltage: 5 Output Current: 200mA Output Power (W): 1 No. Outputs: S Case: Through Hole Get a Quote
LANE1205ND6KV Input Voltage: 12 Output Voltage: 5, -5 Output Current: ±100mA Output Power (W): 1 No. Outputs: D Case: Through Hole Get a Quote
LANE1212N6KV Input Voltage: 12 Output Voltage: 12 Output Current: 80mA Output Power (W): 1 No. Outputs: S Case: Through Hole Get a Quote
LANE1212ND6KV Input Voltage: 12 Output Voltage: 12, -12 Output Current: ±40mA Output Power (W): 1 No. Outputs: D Case: Through Hole Get a Quote
LANE1215N6KV Input Voltage: 12 Output Voltage: 15 Output Current: 65mA Output Power (W): 1 No. Outputs: S Case: Through Hole Get a Quote
LANE1215ND6KV Input Voltage: 12 Output Voltage: 15, -15 Output Current: ±35mA Output Power (W): 1 No. Outputs: D Case: Through Hole Get a Quote
LANE505N6KV Input Voltage: 5 Output Voltage: 5 Output Current: 200mA Output Power (W): 1 No. Outputs: S Case: Through Hole Get a Quote
LANE505ND6KV Input Voltage: 5 Output Voltage: 5, -5 Output Current: ±100mA Output Power (W): 1 No. Outputs: D Case: Through Hole Get a Quote
LANE512N6KV Input Voltage: 5 Output Voltage: 12 Output Current: 80mA Output Power (W): 1 No. Outputs: S Case: Through Hole Get a Quote
LANE512ND6KV Input Voltage: 5 Output Voltage: 12, -12 Output Current: ±40mA Output Power (W): 1 No. Outputs: D Case: Through Hole Get a Quote
LANE515N6KV Input Voltage: 5 Output Voltage: 15 Output Current: 65mA Output Power (W): 1 No. Outputs: S Case: Through Hole Get a Quote
LANE515ND6KV Input Voltage: 5 Output Voltage: 15, -15 Output Current: ±35mA Output Power (W): 1 No. Outputs: D Case: Through Hole Get a Quote
Specification Value
Input
Input Voltage (Nominal): 5, 12
Input Voltage Range: 10.8-13.2, 4.5-5.5
Input Filter: LC Filter
Input Frequency: 0 Hz
Output
Output Voltage: 5, 12, 15, ±5, ±12, ±15
Voltage Accuracy: ±3.0%
Output Current: 200mA, ±100mA, 80mA, ±40mA, 65mA, ±35mA
Output Power (Watts): 1
Short Circuit Protection: 0.5 s
General
Efficiency: Up to 75%
Isolation: 3000VACrms
Environmental
Operating Temperature: -25 - +85°C
Storage Temperature: -50 - +125°C
Physical
Weight: 0.14 oz.
Dimensions: 0.87in. × 0.3in. × 0.49in.
Case Material: Non-Conductive Black Plastic
Notes & safety
Notes: 1. The LANE-6KV Series requires a minimum load on the output to maintain specified regulation. Operation under no-load conditions will not damage these devices; however they may not meet all listed specifications.
2.All DC/DC converters should be externally fused at the front end for protection.
Due to advances in technology, specifications are subject to change without notice.
Safety Approvals: cUL/UL60950-1, CSA C22.2 No. 60950-1-03, IEC/EN 60950-1, UL60601-1, CSA C22.2 No. 601-1, IEC/EN 60601-1 (3rd edition)
RoHS Compliance: Yes

Get a Quote

Request information for from Wall Industries.

Fields marked with an * are required
Medical Military Railway Lighting Industrial Level VI

Custom Solutions

Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don't have a specification, Wall's engineering team will assist you in determining what your requirements are and how best to provide a solution.

Learn More