The DCMAR1 series of DC/DC switching regulators offers 1A of output current in a compact industrial 0.45” x 0.30” x 0.40” standard SIP-3 package. This series consists of fully regulated single output models with low ripple & noise and high efficiency. Each model in this series has no minimum load requirement, over temperature and short circuit protection, and is RoHS & REACH compliant. Please contact factory for order details.
|DCMAR1-033||Input Voltage: 6.5~32||Output Voltage: 3.3||Output Current: 1000mA||Output Power (W): -||No. Outputs: S||Case: Through Hole||Size: 0.45" x 0.3" x 0.4"||Get a Quote|
|DCMAR1-05||Input Voltage: 6.5~32||Output Voltage: 5||Output Current: 1000mA||Output Power (W): -||No. Outputs: S||Case: Through Hole||Size: 0.45" x 0.3" x 0.4"||Get a Quote|
|DCMAR1-12||Input Voltage: 15~32||Output Voltage: 12||Output Current: 1000mA||Output Power (W): -||No. Outputs: S||Case: Through Hole||Size: 0.45" x 0.3" x 0.4"||Get a Quote|
|Input Voltage (Nominal):||6.5~32, 15~32|
|Input Voltage Range:||6.5~32, 15~32|
|Input Filter:||Internal Capacitor|
|Output Voltage:||3.3, 5, 12|
|Output Power (Watts):||-|
|Short Circuit Protection:||Continuous, Automatic Recovery|
|Efficiency:||Up to 96%|
|Operating Temperature:||-40 to +85ºC|
|Storage Temperature:||-55 to +125ºC|
|Dimensions:||0.45in x 0.30in x 0.40in (11.5mm x 7.55mm x 10.2mm)|
|Case Material:||Non-Conductive Black Plastic|
|Notes & safety|
|Notes:||1. With input capacitor 22µF/50V (CHEMI-CON KY) for input voltage >28VDC, input voltage allows 32VDC, max.
2. Other input and output voltages may be available, please contact factory.
3. It is recommended to protect the converter by a slow blow fuse in the input supply line.
4. Natural convection is about 20LFM but is not equal to still air (0 LFM)
5. To meet EN55022 Class A,B an external filter is necessary. Please contact factory
6. This series can meet EN61000-4-4 by adding a capacitor across the input pins. Suggested capacitor: 22µF/50V (CHEMI-CON KY).
*Due to advances in technology, specifications subject to change without notice.
Get a Quote
Request information for from Wall Industries.
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.Learn More