The PSPSS-60 series of AC DC power suppliesoffers up to 60W of output power in a 4” x 2” x 1.18” open frame constructed design. All models have a single output and a universal AC input. Some features include wide operating temperature range (-20°C to +70°C), efficiency up to 87%, and output adjustability. These supplies are RoHS compliant and have UL/cUL, CB, and CE safety approvals. All models are protected against over load, over voltage, and short circuit conditions. All units are 100% full load burn-in tested.
|PSPSS-60-3.3||Input Voltage: 90~264||Output Voltage: 3.3||Output Current: 8A||Output Power (W): 26.4||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSPSS-60-5||Input Voltage: 90~264||Output Voltage: 5||Output Current: 8A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSPSS-60-12||Input Voltage: 90~264||Output Voltage: 12||Output Current: 4.5A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSPSS-60-15||Input Voltage: 90~264||Output Voltage: 15||Output Current: 3.6A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSPSS-60-24||Input Voltage: 90~264||Output Voltage: 24||Output Current: 2.5 A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSPSS-60-48||Input Voltage: 90~264||Output Voltage: 48||Output Current: 1.25A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|Input Voltage (Nominal):||115/230|
|Input Voltage Range:||90~264|
|Output Voltage:||3.3, 5, 12, 15, 24, 48|
|Output Current:||1.25A, 2.5A, 3.6A, 4.5A, 8A|
|Output Power (Watts):||26.4, 40, 54, 60|
|Output Trim/Adjustability:||-5.0% ~ +10% of rated output voltage|
|Short Circuit Protection:||Long-Term Mode, Autoamtic Recovery|
|Over Voltage Protection:||110~150%|
|Efficiency:||Up to 87%|
|Isolation:||3000VAC; ≤10mA (primary to secondary)|
|Operating Temperature:||-20 to 70°C|
|Storage Temperature:||-40 to 85°C|
|Dimensions:||4.00" x 2.00" x 1.18" (101.6 x 50.8 x 30 mm)|
|Notes & safety|
|Notes:||1. Ripple & noise is measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with 0.1μF and 47μF capacitors in parallel.
2. The SPS is considered a component which will be installed into final equipment. The final equipment must be
re-confirmed that it still meets EMC directives.
Due to advances in technology, specifications subject to change without notice.
|Safety Approvals:||GB4943-2001, EN60950-1: 2006|
Get a Quote
Request information for from Wall Industries.
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don't have a specification, Wall's engineering team will assist you in determining what your requirements are and how best to provide a solution.Learn More