The PSPSD-60 series of AC/DC switching power supplies offers 60 Watts of output power in a 5.08” x 3.86” x 1.50” enclosed case. All models have a single output and a universal AC input voltage range of 88~264VAC. Some features include wide operating temperature range (-20°C to +70°C), output adjustability, and over load, over voltage, and short circuit protection. These supplies are RoHS compliant and have UL/cUL and CE safety approvals. All models are 100% full load burn-in tested.
|PSPSD-60-5||Input Voltage: 88~264||Output Voltage: 5||Output Current: 12A||Output Power (W): 60||No. Outputs: S||Case: Enclosed Case||Size: 5.08" x 3.86" x 1.5"||Get a Quote|
|PSPSD-60-12||Input Voltage: 88~264||Output Voltage: 12||Output Current: 5A||Output Power (W): 60||No. Outputs: S||Case: Enclosed Case||Size: 5.08" x 3.86" x 1.5"||Get a Quote|
|PSPSD-60-15||Input Voltage: 88~264||Output Voltage: 15||Output Current: 4.0A||Output Power (W): 60||No. Outputs: S||Case: Enclosed Case||Size: 5.08" x 3.86" x 1.5"||Get a Quote|
|PSPSD-60-24||Input Voltage: 88~264||Output Voltage: 24||Output Current: 2.5A||Output Power (W): 60||No. Outputs: S||Case: Enclosed Case||Size: 5.08" x 3.86" x 1.5"||Get a Quote|
|PSPSD-60-48||Input Voltage: 88~264||Output Voltage: 48||Output Current: 1.25A||Output Power (W): 60||No. Outputs: S||Case: Enclosed Case||Size: 5.08" x 3.86" x 1.5"||Get a Quote|
|Input Voltage (Nominal):||115/230|
|Input Voltage Range:||88~264|
|Output Voltage:||5, 12, 15, 24, 48|
|Output Current:||12A, 5A, 4.0A, 2.5A, 1.25A|
|Output Power (Watts):||60|
|Output Trim/Adjustability:||See Data Sheet|
|Short Circuit Protection:||Long-term mode, Automatic Recovery|
|Over Voltage Protection:||120~150%|
|Efficiency:||Up to 83%|
|Operating Temperature:||-20 to 70°C|
|Storage Temperature:||-40 to 85°C|
|Dimensions:||5.08" x 3.86" x 1.50" (129 x 98 x 38 mm)|
|Notes & safety|
|Notes:||1. Ripple & noise is measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with 0.1μF and 47μF capacitors in parallel.
2. The SPS is considered a component which will be installed into final equipment. The final equipment must be
re-confirmed that it still meets EMC directives.
3. This product is Listed to applicable standards and requirements by UL.
Due to advances in technology, specifications subject to change without notice.
|Safety Approvals:||UL60950-1, EN60950-1: 2006|
Get a Quote
Request information for from Wall Industries.
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.Learn More