The PSM180 series of AC/DC medical power supplies provides 120 Watts with convection cooling and 180 Watts with 15CFM forced airflow in a compact 3 x 5 inch open frame footprint. This series consists of single output models ranging from 12VDC to 48VDC with a 90~264VAC input voltage range. These supplies also feature a low leakage current of less than 100μA at 264VAC, power factor > 0.95 at 115VAC, and 87% typical efficiency. These supplies are also protected against short circuit, over voltage, and over load conditions. The PSM180 series has UL60601-1 3rd ed., EN60601-1 3rd ed., CSA-C22.2 No.60601-1 3rd ed., and IEC EN60601-1 3rd ed. medical approvals.
|PSM180B-1Y120||Input Voltage: 91~260||Output Voltage: 12||Output Current: 15.00A||Output Power (W): 180||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSM180B-1Y150||Input Voltage: 91~260||Output Voltage: 15||Output Current: 12.00A||Output Power (W): 180||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSM180B-1Y190||Input Voltage: 91~260||Output Voltage: 19||Output Current: 9.48A||Output Power (W): 180||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSM180B-1Y240||Input Voltage: 91~260||Output Voltage: 24||Output Current: 7.50A||Output Power (W): 180||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSM180B-1Y280||Input Voltage: 91~260||Output Voltage: 28||Output Current: 6.43A||Output Power (W): 180||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSM180B-1Y480||Input Voltage: 91~260||Output Voltage: 48||Output Current: 3.75A||Output Power (W): 180||No. Outputs: S||Case: Open Frame||Get a Quote|
|Input Voltage (Nominal):||115/230|
|Input Voltage Range:||91~260|
|PFC:||PF > 0.95 at 115VACPF > 0.90 at 230VAC|
|Input Frequency:||47 - 63Hz|
|Output Voltage:||12, 15, 19, 24, 28, 48|
|Output Current:||15A, 12A, 9.48A, 7.50A, 6.43A, 3.75A|
|Output Power (Watts):||180|
|Short Circuit Protection:||Automatic Recovery|
|Over Voltage Protection:||Latching Type, AC Recycle|
|Operating Temperature:||0 to 60°C|
|Storage Temperature:||-40 to 85°C|
|Dimensions:||5.00" x 3.00" x 1.18" (127.0 x 76.2 x 30.0 mm)|
|Notes & safety|
|Notes:||1. 120W max. with convection cooling and 180W max. with 15CFM minimum forced airflow.
2. Ripple & noise is measured at 20MHz limited bandwidth and with a 10µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel across the output.
Due to advances in technology, specifications subject to change without notice.
|Safety Approvals:||UL60601-1 3rd ed.., EN60601-1 3rd ed., CSA-C22.2 No.60601-1 3rd ed., IEC EN60601-1 3rd ed.|
Get a Quote
Request information for from Wall Industries.
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don't have a specification, Wall's engineering team will assist you in determining what your requirements are and how best to provide a solution.Learn More