PSIM65
The PSIM65 series of AC/DC medical power supplies provides up to 65 Watts of output power in a compact 2 x 3 inch open frame package. This series consists of single output models ranging from 5VDC to 56VDC with a 90~264VAC input voltage range. These supplies also feature a low leakage current of less than 189μA at 264VAC, no load power consumption less than 0.2W, and 88% typical efficiency. These supplies are also protected against short circuit, over voltage, and over load conditions. The PSIM65 series is RoHS and Level VI compliant and has both medical 60601-1 3rd edition and ITE 60950-1 safety approvals
| Model Number |
Input Voltage |
Output Voltage |
Output Current |
Output Power (W) |
No. Outputs |
Case | Size | |
|---|---|---|---|---|---|---|---|---|
| PSIM040B-1Y05 | Input Voltage: 90~260 | Output Voltage: 5 | Output Current: 8A | Output Power (W): 40 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y12 | Input Voltage: 90~260 | Output Voltage: 12 | Output Current: 5.42A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y15 | Input Voltage: 90~260 | Output Voltage: 15 | Output Current: 4.34A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y19 | Input Voltage: 90~260 | Output Voltage: 19 | Output Current: 3.43A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y20 | Input Voltage: 90~260 | Output Voltage: 20 | Output Current: 3.25A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y24 | Input Voltage: 90~260 | Output Voltage: 24 | Output Current: 2.71A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y28 | Input Voltage: 90~260 | Output Voltage: 28 | Output Current: 2.33A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y48 | Input Voltage: 90~260 | Output Voltage: 48 | Output Current: 1.36A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| PSIM065B-1Y56 | Input Voltage: 90~260 | Output Voltage: 56 | Output Current: 1.16A | Output Power (W): 65 | No. Outputs: S | Case: Open Frame | Size: 3" x 2" x 1.13" | Get a Quote |
| Specification | Value |
|---|---|
| Input | |
| Input Voltage (Nominal): | 115/230 |
| Input Voltage Range: | 90~260 |
| Input Frequency: | 47 - 63Hz |
| Output | |
| Output Voltage: | 5, 12, 15, 19, 20, 24, 28, 48, 56 |
| Output Current: | 8A, 5.42A, 4.34A, 3.43A, 3.25A, 2.71A, 2.33A, 1.36A, 1.16A |
| Output Power (Watts): | 40, 65 |
| Short Circuit Protection: | Automatic Recovery |
| Over Voltage Protection: | AC Recycle |
| General | |
| Efficiency: | Up to 87% |
| Environmental | |
| Operating Temperature: | -20 to 70°C |
| Storage Temperature: | -20 to 85°C |
| Physical | |
| Weight: | 4.23oz (120g) |
| Dimensions: | 3.00" x 2.00" x 1.13" (76.2 x 50.8 x 28.7 mm) |
| Notes & safety | |
| Notes: | 1. Ripple & noise is measured at 20MHz limited bandwidth and with a 100µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel across the output. 2. This product is Listed to applicable standards and requirements by UL. Due to advances in technology, specifications subject to change without notice. |
| Safety Approvals: | UL60950-1, CSA-C22.2 NO.950-1, EN60950-1, CB IEC60950-1UL60601-1 3rd ed.., EN60601-1 3rd ed., CSA-C22.2 No.60601-1 3rd ed., IEC EN60601-1 3rd ed. |
| RoHS Compliance: | Yes |
| Energy Star Compliance: | Level VI |
Get a Quote
Request information for from Wall Industries.
"*" indicates required fields
Medical Power Supplies
Military Power Supplies
Railway Power Converters
Lighting Power Supplies
Industrial Power Supplies
Level VI Power Supplies
Custom Solutions
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.
Custom Power Supplies