The PSHF35W series of AC/DC switching power supplies offers up to 36 Watts of output power in a 3.88” x 3.23” x 1.38” enclosed case. This series consists of single output models ranging from 5VDC to 48VDC with a 170~264VAC (210~370VDC) input voltage range. Some features include ±10% output adjustability, high efficiency up to 85%, and over load and short circuit protection. The PSHF35W series has GB4943, UL60950, and EN60950 safety approvals and meets GB9254 and EN55022 Class A EMC standards. These supplies are also RoHS compliant and have been 100% full load burn-in tested.
|PSHF35W-SE-48||Input Voltage: 170~264||Output Voltage: 48||Output Current: 0.7A||Output Power (W): 33.6||No. Outputs: S||Case: Enclosed Case||Get a Quote|
|PSHF35W-SE-5||Input Voltage: 170~264||Output Voltage: 5||Output Current: 7.0A||Output Power (W): 35||No. Outputs: S||Case: Enclosed Case||Get a Quote|
|PSHF35W-SE-12||Input Voltage: 170~264||Output Voltage: 12||Output Current: 3.0A||Output Power (W): 36||No. Outputs: S||Case: Enclosed Case||Get a Quote|
|PSHF35W-SE-15||Input Voltage: 170~264||Output Voltage: 15||Output Current: 2.4A||Output Power (W): 36||No. Outputs: S||Case: Enclosed Case||Get a Quote|
|PSHF35W-SE-24||Input Voltage: 170~264||Output Voltage: 24||Output Current: 1.5A||Output Power (W): 36||No. Outputs: S||Case: Enclosed Case||Get a Quote|
|Input Voltage (Nominal):||-|
|Input Voltage Range:||170~264|
|Input Frequency:||47 - 63Hz|
|Output Voltage:||5, 12, 15, 24, 48|
|Output Current:||7.0A, 3.0A, 2.4A, 1.5A, 0.7A|
|Output Power (Watts):||33.6, 35, 36|
|Short Circuit Protection:||hiccup mode, automatic recovery|
|Efficiency:||Up to 85%|
|Operating Temperature:||-20 to 70°C|
|Storage Temperature:||-20 to 85°C|
|Dimensions:||3.88" x 3.23" x 1.38" (98.5 x 82.0 x 35.0 mm)|
|Notes & safety|
|Notes:||1. Single output voltages are available from 5~48VDC. If the desired output voltage is not listed in the table please call factory for more ordering options.
2. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel.
3. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
4. This product is Listed to applicable standards and requirements by UL.
Due to advances in technology, specifications subject to change without notice.
|Safety Approvals:||GB4943; UL60950; EN60950|
Get a Quote
Request information for from Wall Industries.
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.Learn More