The PSHBU60 series of AC/DC medical open frame power supplies offers up to 60 watts of output power in a 3.98” x 2” x 1” package. This series consists of single output models with a wide operating input voltage range of 80-275VAC as well as high ESD immunity. Each model in this series is RoHS 2 compliant, has short circuit, over voltage, and over load protection, and has been 100% burn-in tested. This series has IEC60601-1 Edition 3.1, ES60601-1:2005(R2012), CSA C22.2 No. 60601-1:14, and EN60601-1:2006/A1:2013 safety approvals.
|PSHBU60-105||Input Voltage: 80~275||Output Voltage: 12~13||Output Current: 4.61~5A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSHBU60-106||Input Voltage: 80~275||Output Voltage: 13~16||Output Current: 3.75~4.67A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSHBU60-107||Input Voltage: 80~275||Output Voltage: 16~21||Output Current: 2.85~3.75A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSHBU60-108||Input Voltage: 80~275||Output Voltage: 21~27||Output Current: 2.22~2.85A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSHBU60-109||Input Voltage: 80~275||Output Voltage: 27~33||Output Current: 1.81~2.22A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|PSHBU60-110||Input Voltage: 80~275||Output Voltage: 33~40||Output Current: 1.50~1.81A||Output Power (W): 60||No. Outputs: S||Case: Open Frame||Get a Quote|
|Input Voltage (Nominal):||100/240|
|Input Voltage Range:||80~275|
|Input Frequency:||47 to 63Hz|
|Output Voltage:||12~13, 13~16, 16~21, 21~27, 27~33, 33~40|
|Output Current:||1.81A, 2.22A, 2.85A, 3.75A, 4.67A, 5.00A|
|Output Power (Watts):||60|
|Short Circuit Protection:||Automatic Recovery|
|Over Voltage Protection:||112-132%|
|Operating Temperature:||-10 to 70ºC|
|Storage Temperature:||-40 to 85ºC|
|Dimensions:||3.98in x 2in x 1in|
|Notes & safety|
|Notes:||1. Output can provide up to peak load when the power supply starts up. Staying in more than rated load continually is not allowed.
2. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
3. Load regulation is defined by changing ±40% of measured output load from 60% rated load.
4. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line.
5. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to the low limit of main output at rated load and nominal line.
*Due to advances in technology, specifications subject to change without notice.
|Safety Approvals:||IEC60601-1 Edition 3.1, ES60601-1:2005(R2012), CSA C22.2 No. 60601-1:14, EN60601-1:2006/A1:2013|
Get a Quote
Request information for from Wall Industries.
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.Learn More