PSHBU58

The PSHBU58 series of AC/DC medical open frame power supplies provide up to 60 watts of continuous output power. This series consists of single output models with a wide operating input voltage range of 80~275VAC and output voltages ranging from 5VDC to 55VDC. Each model is protected against short circuit, over voltage and over load conditions and have IEC60601-1 Edition 3.1, ES60601-1:2005(R2012), CSAC22.2 NO.6060-1-1:14, and EN60601-1:2006/A1:2013 safety approvals.

• Wide Operating Input Voltage of 80~275VAC • Single Outputs • Over Voltage, Over Load, and Short Circuit Protection • Protection Class I • Cooling by Free Air Convection • High Efficiency up to 90% • Output Power Up to 60 Watts • Support Risk Management Process • Input to Output: 2MOPP • High ESD Immunity • IEC60601-1 Edition 3.1, ES60601-1:2005(R2012), CSAC22.2 NO.60601-1:14, and EN60601-1:2006/A1:2013 Safety Approvals
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Output
Power (W)
No.
Outputs
Case  
PSHBU58-102 Input Voltage: 80~275 Output Voltage: 5~6 Output Current: 5.50~6.60A Output Power (W): 33 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-103 Input Voltage: 80~275 Output Voltage: 6~8 Output Current: 5~6.66A Output Power (W): 40 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-104 Input Voltage: 80~275 Output Voltage: 8~11 Output Current: 4.54~6.25A Output Power (W): 50 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-105 Input Voltage: 80~275 Output Voltage: 11~13 Output Current: 4.61~5.45A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-106 Input Voltage: 80~275 Output Voltage: 13~16 Output Current: 3.75~4.67A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-107 Input Voltage: 80~275 Output Voltage: 16~21 Output Current: 2.85~3.75A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-108 Input Voltage: 80~275 Output Voltage: 21~27 Output Current: 2.22~2.85A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-109 Input Voltage: 80~275 Output Voltage: 27~33 Output Current: 1.81~2.22A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-110 Input Voltage: 80~275 Output Voltage: 33~40 Output Current: 1.50~1.81A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-111 Input Voltage: 80~275 Output Voltage: 40~50 Output Current: 1.20~1.50A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
PSHBU58-112 Input Voltage: 80~275 Output Voltage: 50~55 Output Current: 1.09~1.20A Output Power (W): 60 No. Outputs: S Case: Open Frame Get a Quote
Specification Value
Input
Input Voltage (Nominal): 115/230
Input Voltage Range: 80~275
Input Frequency: 47~63Hz
Output
Output Voltage: 5~6, 6~8, 8~11, 11~13, 13~16, 16~21, 21~27, 27~33, 33~40, 40~50, 50~55
Output Current: 5.50~6.60A, 5~6.66A, 4.54~6.25A, 4.61~5.45A, 3.75~4.67A, 2.85~3.75A, 2.22~2.85A, 1.81~2.22A, 1.50~1.81A, 1.50~1.81A, 1.20~1.50A, 1.09~1.20A
Output Power (Watts): 33, 40, 50, 60
Short Circuit Protection: Automatic Recovery
Over Voltage Protection: Crowbar Mode 110-275%
General
Efficiency: Up to 90%
Environmental
Operating Temperature: -10 to 70°C
Storage Temperature: -40 to 85°C
Physical
Weight: 4.94oz (140g)
Dimensions: 4.0" x 1.5" x 1.04" (101.6 x 38.1 x 26.5 mm)
Notes & safety
Notes: (1) Setting voltage range is a factory setting and cannot be adjusted.
(2) Output can provide up to peak load when the power supply starts up. Continuous staying in more than rated load is not allowed.
(3) In 60% rated load condition, each output is checked to be within voltage accuracy.
(4) Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
(5) Load regulation is defined by changing ±40% of measured output load from 60% rated load.
(6) Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47µF capacitor at rated load and nominal line.
(7) Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line.
(8) Efficiency is measured at rated load and nominal line.
Due to advances in technology, specifications subject to change without notice.
Safety Approvals: IEC60601-1 Edition 3.1, ES60601-1: 2005 (R1012), CSAC22.2 NO.60601-1:14, EN60601-1:2006/A1:2013
RoHS Compliance: Yes

Get a Quote

Request information for from Wall Industries.

Fields marked with an * are required
Medical Military Railway Lighting Industrial Level VI

Custom Solutions

Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don't have a specification, Wall's engineering team will assist you in determining what your requirements are and how best to provide a solution.

Learn More