PSDMF120
The PSDMF120 series of AC/DC converters offers up to 120 watts of power in a 1.34” x 4.76” x 4.88” DIN rail package. This series consists of single output models with a wide input voltage range of either 85-277VAC or 120-390VDC. Each model features high efficiency, active PFC, and DC OK function. It is protected against output short circuit, over current, over voltage, and over temperature conditions and has safety according to IEC/UL62368, EN60335, E62477, and UL508.
Model Number |
Input Voltage |
Output Voltage |
Output Current |
Output Power (W) |
No. Outputs |
Case | Size | |
---|---|---|---|---|---|---|---|---|
PSDMF120-12S | Input Voltage: 85~277 | Output Voltage: 12 | Output Current: 10A | Output Power (W): 120 | No. Outputs: S | Case: DIN Rail | Size: 1.34" x 4.76 x 4.88" | Get a Quote |
PSDMF120-24S | Input Voltage: 85~277 | Output Voltage: 24 | Output Current: 5A | Output Power (W): 120 | No. Outputs: S | Case: DIN Rail | Size: 1.34" x 4.76 x 4.88" | Get a Quote |
PSDMF120-48S | Input Voltage: 85~277 | Output Voltage: 48 | Output Current: 2.5A | Output Power (W): 120 | No. Outputs: S | Case: DIN Rail | Size: 1.34" x 4.76 x 4.88" | Get a Quote |
Specification | Value |
---|---|
Input | |
Input Voltage (Nominal): | 115/230 |
Input Voltage Range: | 85~277 |
PFC: | 115VAC: 0.98 230VAC: 0.95 |
Input Frequency: | 47 - 63Hz |
Output | |
Output Voltage: | 12, 24, 48 |
Voltage Accuracy: | ±1.0% |
Output Current: | 10A, 5A, 2.5A |
Output Power (Watts): | 120W |
Short Circuit Protection: | Yes |
Over Voltage Protection: | See Data Sheet |
Thermal Protection: | Yes |
General | |
Efficiency: | Up to 94.5% |
Isolation: | Up to 4000VAC |
Environmental | |
Operating Temperature: | -40 to 85°C |
Storage Temperature: | -40 to 85°C |
Physical | |
Weight: | 1.92lbs (870g) |
Dimensions: | 1.89in x 4.76in x 4.88in (48mm x 121mm x 124mm) |
Case Material: | Metal (AL5052, SUS304) |
Notes & safety | |
Notes: | 1. When the output voltage rises, the total power of the product should not exceed the rated power 2. The “Tip and barrel method” is used for ripple and noise test, output parallel 47uF electrolytic capacitor and 0.1uF ceramic capacitor. Contact factory for more information. 3. Power supply has 3 converters with three different switching frequencies. Auxiliary source frequency is nearly constant, other switching frequencies depend on input voltage and load. 4. In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability. 5. Customization is available, contact factory for more details. 6. Out case needs to be connected to PE of system when the terminal equipment is in operation. 7. Output voltage can be adjusted by the ADJ, clockwise to increase. 8. Our products should be classified according to ISO14001 and related environmental laws and regulations and should be handled by qualified units. *Due to advances in technology, specifications subject to change without notice. |
Safety Approvals: | Design Refers to UL508, UL61010, EN/IEC62368, IEC60664 |
RoHS Compliance: | Yes |
Get a Quote
Request information for from Wall Industries.
"*" indicates required fields
Custom Solutions
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.
Custom Power Supplies