PSDG-480
The PSDG-480 series of AC/DC DIN rail offers up to 480 watts of output power (720 watts at peak load capacity) in an ultra-slim 4.79” x 2.76” x 4.88” package. This series consists of single output models with a universal input voltage range of 85~264VAC and high efficiency. Each model in this series features built-in active PFC, current sharing function, DC OK relay contact, and current limiting circuit, as well as over load, over voltage, over temperature, and short circuit protection. This series can be installed on TS-35/7.5 or TS-35/15, supports 1+1 or N+1 redundant systems, and has easy fuse tripping due to a high overload current. The PSDG-480 series has UL508, UL60950, and EN60950 safety approvals and has been 100% full load burn-in tested. Please contact factory for order details.
| Model Number |
Input Voltage |
Output Voltage |
Output Current |
Output Power (W) |
No. Outputs |
Case | Size | |
|---|---|---|---|---|---|---|---|---|
| PSDG-480-24 | Input Voltage: 85~264 | Output Voltage: 24 | Output Current: 20A | Output Power (W): 480 | No. Outputs: S | Case: DIN Rail | Size: 4.79" x 2.76" x 4.88" | Get a Quote |
| PSDG-480-48 | Input Voltage: 85~264 | Output Voltage: 48 | Output Current: 10A | Output Power (W): 480 | No. Outputs: S | Case: DIN Rail | Size: 4.79" x 2.76" x 4.88" | Get a Quote |
| Specification | Value |
|---|---|
| Input | |
| Input Voltage (Nominal): | 110/230 |
| Input Voltage Range: | 85~264 |
| PFC: | @110VAC: 0.99 @230VAC: 0.95 |
| Input Frequency: | 47 to 63Hz |
| Output | |
| Output Voltage: | 24, 48 |
| Voltage Accuracy: | ±3% |
| Output Current: | 20A, 10A |
| Output Power (Watts): | 480 |
| Short Circuit Protection: | Automatic Recovery |
| Over Voltage Protection: | 24V Model: 28.8-33V 48V Model: 58-63V |
| Thermal Protection: | 115±5ºC |
| General | |
| Efficiency: | 93.8% |
| Environmental | |
| Operating Temperature: | -25 to 70ºC |
| Storage Temperature: | -40 to 85ºC |
| Physical | |
| Weight: | 2.87lbs (1300g) |
| Dimensions: | 4.79in x 2.76in x 4.88in (121.6mm x 70mm x 124mm) |
| Notes & safety | |
| Notes: | 1. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uF & 10uF parallel capacitor. 2. This power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Contact factory for more information. 3. This product is Listed to applicable standards and requirements by UL. *Due to advances in technology, specifications subject to change without notice. |
| Safety Approvals: | UL508, UL60950, EN60950 |
Get a Quote
Request information for from Wall Industries.
"*" indicates required fields
Medical Power Supplies
Military Power Supplies
Railway Power Converters
Lighting Power Supplies
Industrial Power Supplies
Level VI Power Supplies
Custom Solutions
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.
Custom Power Supplies