PSCPF100

The PSCPF100 series of AC/DC power supplies offers up to 102.6 watts of output power in a 7.05” x 3.90” x 1.18” enclosed package. This series consists of single output models with a universal AC input of 85~264VAC (120~370VDC). Each model in this series features remote on/off control, built-in active PFC function and constant current limiting circuit, as well as an LED indicator for power on. This series also has protection against short circuit, over load, over voltage, and over temperature conditions and UL60950-1, TUV EN60950-1, EN61558-1, EN61558-2-16, EACH TP TC 004, and CCC GB4943.1 safety approvals.

• Universal AC Input/Full Range of 85~264VAC (120~370VDC) • Built-In Active PFC Function • Remote ON/OFF Control • LED Indicator for Power On • Built-In Constant Current Limiting Circuit • 100% Full Load Burn-In Test • Short Circuit, Over Load, Over Voltage, and Over Temperature Protection • Over Voltage Category III • Cooling by Free Air Convection • 1U Low Profile 30mm • UL60950-1, TUV EN60950-1, EN61558-1, EN61558-2-16, EAC TP TC 004, and CCC GB4943.1 Safety Approvals
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Output
Power (W)
No.
Outputs
Case  
PSCPF100-3.3S Input Voltage: 85~264 Output Voltage: 3.3 Output Current: 20A Output Power (W): 66 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-5S Input Voltage: 85~264 Output Voltage: 5 Output Current: 20A Output Power (W): 100 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-15S Input Voltage: 85~264 Output Voltage: 15 Output Current: 6.7A Output Power (W): 100.5 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-24S Input Voltage: 85~264 Output Voltage: 24 Output Current: 4.2A Output Power (W): 100.8 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-48S Input Voltage: 85~264 Output Voltage: 48 Output Current: 2.1A Output Power (W): 100.8 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-7.5S Input Voltage: 85~264 Output Voltage: 7.5 Output Current: 13.5A Output Power (W): 101.25 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-13.5S Input Voltage: 85~264 Output Voltage: 13.5 Output Current: 7.5A Output Power (W): 101.25 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-12S Input Voltage: 85~264 Output Voltage: 12 Output Current: 8.5A Output Power (W): 102 No. Outputs: S Case: Enclosed Case Get a Quote
PSCPF100-27S Input Voltage: 85~264 Output Voltage: 27 Output Current: 3.8A Output Power (W): 102.6 No. Outputs: S Case: Enclosed Case Get a Quote
Specification Value
Input
Input Voltage (Nominal): 85~264
Input Voltage Range: 115/230
PFC: 230VAC, Full Load: >0.93
115VAC, Full Load: >0.98
Input Frequency: 47~63Hz
Output
Output Voltage: 3.3, 5, 7.5, 12, 13.5, 15, 24, 27, 48
Output Current: 2.1A, 3.8A, 4.2A, 6.7A, 7.5A, 8.5A, 13.5A, 20A
Output Power (Watts): 66, 100, 100.5, 100.8, 101.25, 102, 102.6
Short Circuit Protection: Yes
Over Voltage Protection: Yes
General
Efficiency: Up to 88%
Environmental
Operating Temperature: -30 to +70ºC
Storage Temperature: -40 to +85ºC
Physical
Weight: 18.34oz (520g)
Dimensions: 7.05in x 3.90in x 1.18in (179mm x 99mm x 30mm)
Notes & safety
Notes: 1. Ripple & Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. The power supply is considered a component which will be installed into final equipment. Final equipment must be re-confirmed that it still meets EMC directives.
3. It is strongly recommended that external output capacitances should not exceed 5000uF (only for 3.3VDC, 5VDC, and 7.5VDC models)
4. Ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m (6500ft).
5. This product is listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
Safety Approvals: UL60950-1, TUV EN60950-1, EN61558-1, EN61558-2-16, EAC TP TC 004, CCC GB4943.1
TUV Efficiency Level: TUV EN60950-1

Get a Quote

Request information for from Wall Industries.

Fields marked with an * are required
Medical Military Railway Lighting Industrial Level VI

Custom Solutions

Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.

Learn More