PSAE1500

The PSAE1500 series of AC/DC switching power supplies provides up to 1502 Watts of output power in a 11.02” x 5.00” x 2.50” enclosed case. This series consists of single output models ranging from 12VDC to 60VDC with a universal input voltage range of 90~264VAC (127~370VDC). Standard features include high efficiency up to 93%, PFC > 0.95 at 230VAC, programmable output voltage and output current, remote on/off, remote sense, and power OK signal. This series also has over temperature, over voltage, and over load protection. All models are RoHS compliant and have UL 60950-1 and EN60950-1 safety approvals.

• RoHS Compliant • PFC > 0.95 at 230VAC • Up to 1502 Watts Output Power • High Efficiency up to 93% • 3000VAC (4242VDC) I/O Isolation • Constant Current Limiting • Global Control via RS232 • Power OK Signal • Protection: OLP, OVP, OTP, Fan Failure • Remote Setting Multiple PSU via RS232, RS485 & I2C • Programmable Output Voltage (0~105%) • Programmable Output Current (0~105%) • Remote ON/OFF, Remote Sense Functions • Universal Input Voltage Range: 90~264VAC (127~370VDC) • Single Outputs Ranging from 12VDC to 60VDC • Selectable +5V/0.5A or +9V/0.3A Auxiliary Output • Forced Current Sharing at Parallel Operation • UL 60950-1 and EN60950-1 Safety Approvals
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Output
Power (W)
No.
Outputs
Case  
PSAE-1500-12 Input Voltage: 90~264 Output Voltage: 12 Output Current: 125A Output Power (W): 1500 No. Outputs: S Case: Enclosed with Fan Get a Quote
PSAE-1500-15 Input Voltage: 90~264 Output Voltage: 15 Output Current: 100A Output Power (W): 1500 No. Outputs: S Case: Enclosed with Fan Get a Quote
PSAE-1500-24 Input Voltage: 90~264 Output Voltage: 24 Output Current: 62.5A Output Power (W): 1500 No. Outputs: S Case: Enclosed with Fan Get a Quote
PSAE-1500-30 Input Voltage: 90~264 Output Voltage: 30 Output Current: 50A Output Power (W): 1500 No. Outputs: S Case: Enclosed with Fan Get a Quote
PSAE-1500-60 Input Voltage: 90~264 Output Voltage: 60 Output Current: 25A Output Power (W): 1500 No. Outputs: S Case: Enclosed with Fan Get a Quote
PSAE-1500-36 Input Voltage: 90~264 Output Voltage: 36 Output Current: 41.7A Output Power (W): 1501 No. Outputs: S Case: Enclosed with Fan Get a Quote
PSAE-1500-48 Input Voltage: 90~264 Output Voltage: 48 Output Current: 31.3A Output Power (W): 1502 No. Outputs: S Case: Enclosed with Fan Get a Quote
Specification Value
Input
Input Voltage (Nominal): 115/230
Input Voltage Range: 90~264
Remote ON/OFF: Yes
PFC: 0.99, 0.95
Input Frequency: 47 - 63Hz
Output
Output Voltage: 12, 15, 24, 30, 36, 48, 60
Voltage Accuracy: ±2.0%
Output Current: 125A, 100A, 62.5A, 50A, 41.7A, 31.3A, 25A
Output Power (Watts): 1500
Output Trim/Adjustability: ±5%
Over Voltage Protection: Variable OVP, 120% ±7% Vout
Thermal Protection: Yes
General
Efficiency: Up to 93%
Isolation: Input to Output: 4242VDC (3000VAC) Input to FG: 2121VDC (1500VAC) Output to FG: 707VDC (500VAC)
Environmental
Operating Temperature: -20 to 60°C
Storage Temperature: -40 to 85°C
Physical
Weight: 5.73 lbs (2600g)
Dimensions: 11.02" x 5.00" x 2.50" (280.0 x 127.0 x 63.5 mm)
Notes & safety
Notes: 1. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel.
2. For voltages near the low end of the input voltage range, see the derating curve for the power supply output rating.
3. When in parallel operation only one unit might operate if the total output load is less than 5% of the rated load condition.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Due to advances in technology, specifications subject to change without notice.
Safety Approvals: UL 60950-1, EN60950-1
RoHS Compliance: Yes
TUV Efficiency Level: TUV EN60950-1

Get a Quote

Request information for from Wall Industries.

Fields marked with an * are required
Medical Military Railway Lighting Industrial Level VI

Custom Solutions

Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.

Learn More