The DTA150A-H series of Class I AC/DC desktop power supplies provides up to 150 Watts output power in a 6.69 x 3.35 x 1.73 inch package. This series consists of single output models ranging from 12VDC to 48VDC with a 90~264VAC input voltage range and an IEC-320-C14 AC inlet connector. These supplies also feature no load power consumption <150mW, power factor > 0.95 at 115VAC, and 89% typical efficiency. These supplies are protected against short circuit, over voltage, and over load conditions and have UL60950-1, CSA C22.2-No.60950-1, TUV EN60950-1, and CB IEC60950-1 safety approvals. All models are CEC/Energy Star Level VI compliant. This series has been 100% burn-in and hi-pot tested.
|DTA-140A-1Y120H||Input Voltage: 90~264||Output Voltage: 12||Output Current: 11.67 A||Output Power (W): 140||No. Outputs: S||Case: Desktop||Get a Quote|
|DTA-150A-1Y160H||Input Voltage: 90~264||Output Voltage: 16||Output Current: 9.38 A||Output Power (W): 150||No. Outputs: S||Case: Desktop||Get a Quote|
|DTA-150A-1Y190H||Input Voltage: 90~264||Output Voltage: 19||Output Current: 7.9 A||Output Power (W): 150||No. Outputs: S||Case: Desktop||Get a Quote|
|DTA-150A-1Y240H||Input Voltage: 90~264||Output Voltage: 24||Output Current: 6.25 A||Output Power (W): 150||No. Outputs: S||Case: Desktop||Get a Quote|
|DTA-150A-1Y360H||Input Voltage: 90~264||Output Voltage: 36||Output Current: 4.17 A||Output Power (W): 150||No. Outputs: S||Case: Desktop||Get a Quote|
|DTA-150A-1Y480H||Input Voltage: 90~264||Output Voltage: 48||Output Current: 3.13 A||Output Power (W): 150||No. Outputs: S||Case: Desktop||Get a Quote|
|Input Voltage (Nominal):||115/230|
|Input Voltage Range:||90~264|
|Input Frequency:||47-63 Hz|
|Output Voltage:||12, 16, 19, 24, 36, 48|
|Output Current:||11.67A, 9.38A, 7.9A, 6.25A, 4.17A, 3.13A|
|Output Power (Watts):||140, 150|
|Short Circuit Protection:||Automatic Recovery|
|Over Voltage Protection:||Shutdown and Lach Off, AC Recycle|
|Operating Temperature:||0 to 40°C|
|Storage Temperature:||-10 to 85°C|
|Dimensions:||6.69" x 3.35" x 1.73" (170 x 85 x 44 mm)|
|Notes & safety|
|Notes:||1. Other output voltages are available: 140W for 12~24VDC, 150W for 15~26VDC, 33~39VDC, and 44~52VDC. Please call factory for ordering details.
2. Ripple & noise is measured at 20MHz limited bandwidth and with a 10µF electrolytic capacitor and a 0.1µF ceramic capacitor in parallel across the output.
3. Several output connectors available; please call factory for ordering details.
Due to advances in technology, specifications subject to change without notice.
|Safety Approvals:||UL60950-1, CSA C22.2-No.60950-1, TUV EN60950-1, CB IEC60950-1|
|TUV Efficiency Level:||TUV EN60950-1|
|Energy Star Compliance:||Level VI|
Get a Quote
Request information for from Wall Industries.
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don't have a specification, Wall's engineering team will assist you in determining what your requirements are and how best to provide a solution.Learn More