HP
The HP series is a high-density brick style converter that incorporates the desired features required in today’s demanding low voltage bus applications. Its unique dual interleaved phase shifted topology minimizes both input and output noise. When performance, reliability, and low cost are needed, the HP series delivers.
• 100% Burn-In
• Synchronizable
• Output Trim ±10%
• 1500VDC Isolation
• Operation to No Load
• 600 Watt Output Power (500W below 13VDC input)
• Very Low Output Ripple
• Fast Transient Response
• Output Current up to 120A
• Fixed Switching Frequency
• Remote Sense Compensation
• Remote ON/OFF (Active High/Low)
• Short Circuit and Over Temperature Protection
• 94% Efficient at Half Load, 92% Efficient at Full Load (Typical)
Part Number Setup:
Add "TH" suffix to the model part number for Ø.125 thru-hole
Add "TH" suffix to the model part number for Ø.125 thru-hole
Example:
HP12S24-600TH = 24VDC Output with Ø.125 thru-hole
HP12S24-600TH = 24VDC Output with Ø.125 thru-hole
| Model Number |
Input Voltage |
Output Voltage |
Output Current |
Output Power (W) |
No. Outputs |
Case | Size | |
|---|---|---|---|---|---|---|---|---|
| HP12S12-600 | Input Voltage: 12 | Output Voltage: 12 | Output Current: 50A | Output Power (W): 600 | No. Outputs: S | Case: Through Hole | Size: 6" × 3" × 0.69" | Get a Quote |
| HP12S15-600 | Input Voltage: 12 | Output Voltage: 15 | Output Current: 40A | Output Power (W): 600 | No. Outputs: S | Case: Through Hole | Size: 6" × 3" × 0.69" | Get a Quote |
| HP12S20-600 | Input Voltage: 12 | Output Voltage: 20 | Output Current: 30A | Output Power (W): 600 | No. Outputs: S | Case: Through Hole | Size: 6" × 3" × 0.69" | Get a Quote |
| HP12S24-600 | Input Voltage: 12 | Output Voltage: 24 | Output Current: 25A | Output Power (W): 600 | No. Outputs: S | Case: Through Hole | Size: 6" × 3" × 0.69" | Get a Quote |
| HP12S26-600 | Input Voltage: 12 | Output Voltage: 26 | Output Current: 23A | Output Power (W): 600 | No. Outputs: S | Case: Through Hole | Size: 6" × 3" × 0.69" | Get a Quote |
| HP12S28-600 | Input Voltage: 12 | Output Voltage: 28 | Output Current: 21.42A | Output Power (W): 600 | No. Outputs: S | Case: Through Hole | Size: 6" × 3" × 0.69" | Get a Quote |
| HP12S48-600 | Input Voltage: 12 | Output Voltage: 48 | Output Current: 12.5A | Output Power (W): 600 | No. Outputs: S | Case: Through Hole | Size: 6" × 3" × 0.69" | Get a Quote |
| Specification | Value |
|---|---|
| Input | |
| Input Voltage (Nominal): | 12 |
| Input Voltage Range: | 10~36 |
| Input Filter: | 1,000µF low ESR capcitor recommended |
| Remote ON/OFF: | Active High or Active Low |
| UVLO: | Yes |
| Input Frequency: | 0 Hz |
| Output | |
| Output Voltage: | 12, 15, 20, 24, 26, 28, 48 |
| Voltage Accuracy: | ±1.0 |
| Output Current: | 50A, 40A, 30A, 25A, 23A, 21.42A, 12.5A |
| Output Power (Watts): | 600 |
| Output Trim/Adjustability: | ±10% |
| Short Circuit Protection: | Continuous |
| General | |
| Efficiency: | 92% |
| Isolation: | 1500VDC |
| Environmental | |
| Operating Temperature: | -40°C to +100°C |
| Storage Temperature: | -55°C to +125°C |
| Physical | |
| Weight: | 19.4 oz. |
| Dimensions: | 6in. × 3in. × 0.69in. |
| Case Material: | Aluminum alloy |
| Shielding: | Six-Sided |
| Notes & safety | |
| Notes: | 1. Pin to pin tolerance ±0.01" [±0.25mm]. Pin diameter tolerance ±0.005" [±0.13 mm]. 2. Case material: aluminum alloy. 3. Unit comes with either 3M x 0.5 threaded thru inserts or for Ø.125 thru-hole add "TH" suffix to the model part number. Ex: HP12S24-600TH. 4. Active High Enable is standard; for Active Low Enable add "R" suffix to the model number. Ex: HP12S24-600R. 5. Output power is limited to 500 watts minimum at 13VDC input and below. Due to advances in technology, specifications are subject to change without notice. |
Get a Quote
Request information for from Wall Industries.
"*" indicates required fields
Medical Power Supplies
Military Power Supplies
Railway Power Converters
Lighting Power Supplies
Industrial Power Supplies
Level VI Power Supplies
Custom Solutions
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.
Custom Power Supplies