PSDG-75
The PSDG-75 series of AC/DC industrial DIN Rail power supplies offers up to 75 watts of output power in a 4.69” x 1.26” x 4.88” ultra-slim package. This series consists of single output models with a universal AC input range of 85~264VAC. Each model in this series has many built-in features including built-in active PFC, current sharing function, limiting circuit, and DC OK relay contact. This series has high efficiency up to 91% as well as over voltage, over load, short circuit, and over temperature protection. PSDG-75 series meets UL508, UL60950, and EN60950 safety approvals and has been 100% burn-in tested. Please call factory for order details.
| Model Number | Input Voltage | Output Voltage | Output Current | Output Power (W) | No. Outputs | Case | Size | |
|---|---|---|---|---|---|---|---|---|
| PSDG-75-12 | Input Voltage: 84~264 | Output Voltage: 12 | Output Current: 6.3A | Output Power (W): 75 | No. Outputs: S | Case: DIN Rail | Size: 4.69" x 1.26" x 4.88" | Get a Quote |
| PSDG-75-24 | Input Voltage: 84~264 | Output Voltage: 24 | Output Current: 3.2A | Output Power (W): 75 | No. Outputs: S | Case: DIN Rail | Size: 4.69" x 1.26" x 4.88" | Get a Quote |
| PSDG-75-48 | Input Voltage: 85~264 | Output Voltage: 48 | Output Current: 1.6A | Output Power (W): 75 | No. Outputs: S | Case: DIN Rail | Size: 4.69" x 1.26" x 4.88" | Get a Quote |
| Specification | Value |
|---|---|
| Input | |
| Input Voltage (Nominal): | 100/230 |
| Input Voltage Range: | 85~264 |
| PFC: | @100VAC: 0.99 @230VAC: 0.95 |
| Input Frequency: | 47 to 63Hz |
| Output | |
| Output Voltage: | 12, 24, 48 |
| Voltage Accuracy: | ±1.0% |
| Output Current: | 6.3A, 3.2A, 1.6A |
| Output Power (Watts): | 75 |
| Output Trim/Adjustability: | 12V Model: 12-14V 24V Model: 24-28V 48V Model: 48-56V |
| Short Circuit Protection: | Long Term, Automatic Recovery |
| Over Voltage Protection: | 12V Model: 15-18V 24V Model: 29-33V |
| Thermal Protection: | Yes |
| General | |
| Efficiency: | Up to 91% |
| Environmental | |
| Operating Temperature: | -25 to 70ºC |
| Storage Temperature: | -40 to 85ºC |
| Physical | |
| Weight: | 26.81oz (760g) |
| Dimensions: | 4.69in x 1.26in x 4.88in (119mm x 32mm x 124mm) |
| Notes & safety | |
| Notes: | 1. Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uF & 10uF parallel capacitor. 2. The power supply is considered a component which will be installed into the final equipment. The equipment must be re-confirmed that it still meets EMC directives. 3. This product is listed to applicable standards and requirements by UL. *Due to advances in technology, specifications subject to change without notice. |
| Safety Approvals: | UL508, UL60950, EN60950 |
Get a Quote
Request information for from Wall Industries.
"*" indicates required fields
Medical Power Supplies 
Military Power Supplies 
Railway Power Converters 
Lighting Power Supplies 
Industrial Power Supplies 
Level VI Power Supplies 
Custom Solutions
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.
Custom Power Supplies