DCMSAU2
The DCMSAU2 series of DC/DC converters provides 2 Watts of output power in a miniature SMT package. These converters operate over input voltage ranges of 4.5~5.5VDC, 10.8~13.2VDC, and 21.6~26.4VDC. This series also has single and dual output voltages of 5V, 12V, ±5V, ±12V, and ±15VDC. The DCMSAU2 series’ impressive efficiencies enable these modules to deliver their fully rated output power from –40°C to +80°C without a heatsink or forced-air cooling. The very small footprint of these converters makes them an ideal solution for many applications where a voltage has to be isolated such as for noise reduction, ground loop elimination in digital interfaces, or where a converted voltage is required. These converters are also fully qualified for the higher temperature profile used in lead-free reflow solder processes. These converters can also be supplied in tape&reel packaging for use in automated SMD production lines.
| Model Number |
Input Voltage |
Output Voltage |
Output Current |
Output Power (W) |
No. Outputs |
Case | Size | |
|---|---|---|---|---|---|---|---|---|
| DCMSAU505-2 | Input Voltage: 5 | Output Voltage: 5 | Output Current: 400mA | Output Power (W): 2 | No. Outputs: S | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU512-2 | Input Voltage: 5 | Output Voltage: 12 | Output Current: 165mA | Output Power (W): 2 | No. Outputs: S | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU1205-2 | Input Voltage: 12 | Output Voltage: 5 | Output Current: 400mA | Output Power (W): 2 | No. Outputs: S | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU1212-2 | Input Voltage: 12 | Output Voltage: 12 | Output Current: 165mA | Output Power (W): 2 | No. Outputs: S | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU2405-2 | Input Voltage: 24 | Output Voltage: 5 | Output Current: 400mA | Output Power (W): 2 | No. Outputs: S | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU2412-2 | Input Voltage: 24 | Output Voltage: 12 | Output Current: 165mA | Output Power (W): 2 | No. Outputs: S | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU505D-2 | Input Voltage: 5 | Output Voltage: 5, -5 | Output Current: ±200mA | Output Power (W): 2 | No. Outputs: D | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU512D-2 | Input Voltage: 5 | Output Voltage: 12, -12 | Output Current: ±83mA | Output Power (W): 2 | No. Outputs: D | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU515D-2 | Input Voltage: 5 | Output Voltage: 15, -15 | Output Current: ±66mA | Output Power (W): 2 | No. Outputs: D | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU1212D-2 | Input Voltage: 12 | Output Voltage: 12, -12 | Output Current: ±83mA | Output Power (W): 2 | No. Outputs: D | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU1215D-2 | Input Voltage: 12 | Output Voltage: 15, -15 | Output Current: ±66mA | Output Power (W): 2 | No. Outputs: D | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU2412D-2 | Input Voltage: 24 | Output Voltage: 12, -12 | Output Current: ±83mA | Output Power (W): 2 | No. Outputs: D | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| DCMSAU2415D-2 | Input Voltage: 24 | Output Voltage: 15, -15 | Output Current: ±66mA | Output Power (W): 2 | No. Outputs: D | Case: Surface Mount | Size: 0.5" x 0.37" x 0.34" | Get a Quote |
| Specification | Value |
|---|---|
| Input | |
| Input Voltage (Nominal): | 5, 12, 24 |
| Input Voltage Range: | 10.8~13.2, 21.6~26.4, 4.5~5.5 |
| Input Filter: | Internal Capcitor |
| Input Frequency: | 0 Hz |
| Output | |
| Output Voltage: | 5, 12, ±5, ±12, ±15 |
| Voltage Accuracy: | ±1.5% typ. |
| Output Current: | 400mA, 165mA, ±200mA, ±83mA, ±66mA |
| Output Power (Watts): | 2 |
| Short Circuit Protection: | 0.5S |
| General | |
| Efficiency: | Up to 82% |
| Isolation: | 1000VDC min. (input to output) |
| Environmental | |
| Operating Temperature: | -40 to 85°C |
| Storage Temperature: | -50 to 125°C |
| Physical | |
| Weight: | 0.05 oz |
| Dimensions: | 0.50 x 0.37 x 0.34 |
| Case Material: | Molding |
| Notes & safety | |
| Notes: | 1. The DCMSAU2 series requires a minimum output loading to maintain specified regulations. Operation under no-load conditions will not damage these devices; however they may not meet all listed specifications. 2. All DC/DC converters should be externally fused at the front end for protection. 3. Other input and output voltages may be available, please contact factory. Due to advances in technology, specifications are subject to change without notice. |
| RoHS Compliance: | Yes |
Get a Quote
Request information for from Wall Industries.
"*" indicates required fields
Medical Power Supplies
Military Power Supplies
Railway Power Converters
Lighting Power Supplies
Industrial Power Supplies
Level VI Power Supplies
Custom Solutions
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.
Custom Power Supplies