PSSNP-Y11

The PSSNP-Y11 series of AC/DC open frame power supplies offers rated output power of 110 watts and peak output power of 160 watts in a 6” x 3.5” x 1.42” package. This series consists of single, dual, triple, and quad outputs with an input voltage range of 90 to 264VAC. Each model in this series has short circuit, over load, and over voltage protection and is useful in both medical and ITE applications. This series has UL 60905-1, UL 60601-1, CSA C22.2 No. 60905-1, 601.1, EN60950-1, and EN60601-1 safety approvals.

• Input Voltage Range of 90 to 264VAC • ITE and Medical Safety • Single Side PCB • Useful in Medical or Dental Equipment or ITE Equipment • Single, Dual, Triple, or Quad Outputs • Short Circuit, Over Load, and Over Voltage Protection • Rated Output Power of 110W, Peak Output Power of 160 Watts • UL 60950-1, UL 60601-1, CSA C22.2 No. 60950-1, 601.1, EN60950-1, and EN 60601-1 Safety Approvals
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Output
Power (W)
No.
Outputs
Case  
PSSNP-Y116 Input Voltage: 90~264 Output Voltage: 5 Output Current: 19A Output Power (W): 110 No. Outputs: S Case: Open Frame Get a Quote
PSSNP-Y117-1 Input Voltage: 90~264 Output Voltage: 12 Output Current: 9A Output Power (W): 110 No. Outputs: S Case: Open Frame Get a Quote
PSSNP-Y118-1 Input Voltage: 90~264 Output Voltage: 15 Output Current: 7A Output Power (W): 110 No. Outputs: S Case: Open Frame Get a Quote
PSSNP-Y119-1 Input Voltage: 90~264 Output Voltage: 24 Output Current: 4.5A Output Power (W): 110 No. Outputs: S Case: Open Frame Get a Quote
PSSNP-Y11T Input Voltage: 90~264 Output Voltage: 48 Output Current: 2.3A Output Power (W): 110 No. Outputs: S Case: Open Frame Get a Quote
PSSNP-Y117 Input Voltage: 90~264 Output Voltage: 12, 5 Output Current: 8.5A, 1A Output Power (W): 110 No. Outputs: D Case: Open Frame Get a Quote
PSSNP-Y118 Input Voltage: 90~264 Output Voltage: 15, 5 Output Current: 7A, 1A Output Power (W): 110 No. Outputs: D Case: Open Frame Get a Quote
PSSNP-Y119 Input Voltage: 90~264 Output Voltage: 24, 5 Output Current: 4.5A, 1A Output Power (W): 110 No. Outputs: D Case: Open Frame Get a Quote
PSSNP-Y111 Input Voltage: 90~264 Output Voltage: 5, 12, -12 Output Current: 7A, 5A, 0.5A Output Power (W): 110 No. Outputs: T Case: Open Frame Get a Quote
PSSNP-Y11E Input Voltage: 90~264 Output Voltage: 3.3, 5, 12, -12 Output Current: 10A, 8A, 2A, 0.2A Output Power (W): 110 No. Outputs: M Case: Open Frame Get a Quote
PSSNP-Y110 Input Voltage: 90~264 Output Voltage: 5, 12, -12, -5 Output Current: 6A, 5A, 0.5A, 0.5A Output Power (W): 110 No. Outputs: M Case: Open Frame Get a Quote
PSSNP-Y11F Input Voltage: 90~264 Output Voltage: 5, 24, 12, -12 Output Current: 6A, 2A, 2A, 0.3A Output Power (W): 110 No. Outputs: M Case: Open Frame Get a Quote
Specification Value
Input
Input Voltage (Nominal): 115/230
Input Voltage Range: 90~264
Input Frequency: 47 to 63Hz
Output
Output Voltage: -12, -5, 3.3, 5, 12, 15, 24, 48
Voltage Accuracy: See Datasheet
Output Current: 0.2A, 0.3A, 0.5A, 1A, 2A, 2.3A, 4.5A, 5A, 6A, 7A, 8A, 8.5A, 9A, 10A, 19A
Output Power (Watts): 110
Short Circuit Protection: Automatic Recovery
Over Voltage Protection: Latch Off
General
Efficiency: 78 - 87%
Environmental
Operating Temperature: 0 to 70ºC
Storage Temperature: -40 to 85ºC
Physical
Weight: 12.70oz (360g)
Dimensions: 6in x 3.5in x 1.42in
Notes & safety
Notes: 1. At peak load, output can last for 8 seconds without shut down.
2. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is set to within the specified accuracy range at rated load.
3. PSSNP-Y09x is for both ITE and Medical Applications
4. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
5. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load.
6. Ripple and Noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line.
7. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to regulation limit at rated load and nominal line.
8. Efficiency is measured at nominal line and rated load.
*Due to advances in technology, specifications subject to change without notice.
Safety Approvals: UL 60950-1, UL60601-1, CSA C22.2 No. 60905-1, 601.1, EN 60950-1, EN60601-1

Get a Quote

Request information for from Wall Industries.

Fields marked with an * are required
Medical Military Railway Lighting Industrial Level VI

Custom Solutions

Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don't have a specification, Wall's engineering team will assist you in determining what your requirements are and how best to provide a solution.

Learn More